Exotica, well it used to be....

The deeper you delve into this old Triumph shit the more is there to be unearthed. With the post WWII export drive in full swing the vast majority of the output from Meriden was shipped Stateside, 70% is a figure that's bandied about. Due to this being the major market Triumph sent stuff over there which was rarely seen here in England.

For example the Tiger 100C and T100RR variants, both dedicated competition models, and never meant for the daily commute to work, a fate that befell many of the UK models sold here.

This large capacity, one gallon (imp.) oil tank was made for one of the racing variants and is on The Bay of Fools at the moment, for sale in the US.

The four bosses on the front are to take a bracket that holds a remote float bowl, and are correct as is the extended breather tower. This is indeed a very rare piece, although in the picture above it can be seen that it's full of rust internally, and the outside has not fared particularly well in the interceding sixty odd years. How long before another one surfaces on the market? How many were ever made, and of those, how many have survived?

The buy now price for this object of desire?

$ 600 US

It's in the bag...............

Scored this sweet oil tank of our ol' mate Geoff yesterday, originally thought it was NOS but a probing digit into it's inner sanctum revealed that it has been used.

Having said that, it's hard to think it's done much work as there's not a mark on it, and all bracketry is in place and good. Even the paint is arguably Meriden issue as the date stamp is still clear and crisp beneath the finish.

Here's a close up of that date stamp, 1955 vintage.

Got a bit of powder for the new year

No............... not the ol' Devil's Dandruff! it's something that lasts a little longer than that.

The first batch of rigid Triumph stuff back from the powder coaters, should of held back with the front plates as it turns out but they'll come in handy.

Undecided what to do with the back wheel, whether to stay traditional and go 5.00 x 16 or the trendier modern approach and opt for the skinny, 4.00 x 18 or 19 look.

A thing of beauty.........................

................ is a joy forever.

Following the post a few days ago I hooked up with Joe at Chopped Triumphs and asked him to ship a set of the seriously sweet front engine plates shown on that post. They arrived a day or two ago, and have gone a long way to making my Christmas complete. They look even better in the flesh than they do in pictures and that's saying something.

Well, just had to check 'em out in situ, and seeing as the little lady was out doing seasonal stuff I managed to slap a few bits together in the warmth of the living room. Worth it? what do you think? The fit is perfect, and with the bosses on the plates around 3/8" thick the hole centers leave no room for error. All three of the front studs proved to be a push fit, and there's no reason to doubt the frame lugs will line up equally as well, proper engineering right here from Joe.

As for the all alloy Triumph motor, don't worry there's plenty more to follow on that subject.

In the meantime, if pre-unit Trumpet is the road you're looking at travelling, you'd best be getting in contact with Joe at Chopped Triumphs

Forlorn Hope

This frame came up on the bay of fools a week ago, looking like it was dug out a garden or dredged from the bottom of a river and then shot blasted. It is, what shall we say, beyond viable repair, in fact this is how the seller described it;

"This frame has been exposed to the elements for some time and is in need of some careful repairs. As can be seen in the pictures some of the tubing has completely corroded away and will require new pieces to be brazed in.  The cast lugs are quite badly pitted.  This frame could be salvaged -but only by a skilled person .  However ,it is a very rare item and is worthy of the time and effort to repair it."

So there was obviously no attempt at deception and interestingly enough it was the seller's first foray on the bay.

Now generally I'm a glass half full kinda guy, and can usually see potential in most bike related stuff, but this really would be a project too far.

There's barely a section on it that has escaped the ravages of time, and even those bits that are seemingly in one piece are very likely wafer thin due to internal corrosion. But it has been bought, whether for the castings, the frame number or some kind of modern sculpture it's unknown. If it's going to be restored I'd love to see a blog published detailing progress.

If by the one in a few million chance the new owner is reading this please get in touch, for anybody else have a guess what it sold for in the comments bit.

BSA Factory Tour 1958

Looking for one of these.................

Actively looking for a rear muddie/fender to suit a 47 - 53 rigid Triumph, 5T, 6T or Tiger 100 they're all pretty much the same. I think I have a lead on the shorter lower section so it's really the longer upper section that I crave and lust after. No need for it to be in really good condition, in fact slight damage around the tail end would be an advantage as there is going to be some trimming of the overall length involved. If you can help out please add a comment or send a mail to the addy in the top corner.

Artistic Licence or False Advertising

Scored this the other day, repro unfortunately but interesting just the same. It's a copy of a genuine Triumph publication as can be seen, and therefore can be viewed as somewhat of a gospel. It's well known that companies of the time could be a little imaginative with their claims, and road test bikes were specially prepared before the press got their hands on 'em, but the graph beggars belief. 31 BHP out of a standard 500 of 1951, even at the crank takes some believing, but 43 after fitting the parts is a huge leap of faith.

These are the only parts needed they claimed, available direct from the factory, although they do say the engine and frame numbers must be provided. They could be pretty confident that there were not many Heenan and Froude brake testers available to the average rider, and therefore difficult to disprove, but, Joe Craig, Francis Beart and the other tuners of the day reckoned that 100 BHP per litre was bloody good going. 43 from a tweked road bike, from a factory without a racing programme of it's own, kinda makes you wonder. 

Chopped Triumphs Florida

 Came across a thread on The Jockey Journal over the weekend covering a '59 Bonnie build by Dan over at Angry Monkey featuring some pretty damn fine front engine plates, with an Alton alternator tucked in between 'em.......... nice!

Not seen 'em before so I put on a post as to where they came from, Dan kindly hooked me up with Joe over at Chopped Triumphs in Florida, the more eagle eyed of you out there, may have noticed a new logo that's popped up on the left hand bar, well that's Joe that is.

 

He's making both the dynamo and alternator options, and they both look cooler than a Polar Bear's gonads. Not sure if the black finish or the natural squeezes me harder at the moment, but squeeze me they do.

A pair of these keeping the crank out of the dirt on ya Bobber would make you the envy of all the Cafe Racer jocks on a Saturday night down the Ace.

He's also making this ignition housing to replace a magneto on a Triumph, just the ticket if you feel your old Trumpet would benefit from electronic ignition. Comes complete with the fixed pinion and ready to bolt on.

So if you want drag the old beast kicking and screaming into the 21st century you could do yourself a great deal of good by contacting Joe.

Winter Draws On .................

.............. and the ol' mind wanders, today's musings of choice leans towards vintage flat track;

Liking this a lot.............

Featured in this month's BSH, I reckon this Factory Metal Works unit 750 ticks all the boxes.

Pix shamelessly ripped fron Nomad's blog.